Demonic Fixed-Wing gyro systems

Description

High-quality, reliable and universally ready for use - this is how they have long been known everywhere, the extra class under the gyro systems for fixed-wing aircrafts.

The Special: The tried and tested bavarianDEMON 3-axis stabilization technology makes flying even in wind or gusts to a childs play. The sensors from the gyro adjust every 0.002 seconds unevenness in flight behavior, ensuring absolute peace, stability and precision.

The gyro systems are used universally for all types of remote-controlled fixed-wing airplane, from the Parkflyer to 3D-Acromodels to the scaler or turbines.

For the basic setup there is no PC necessary, the gyros are immediately ready for use. The one-time learning of the control functions, the servo travel and if necessary, the mixer settings, is carried out in a simple and quick learning process via the joystick - ready to go! It also supports a variety of standard serial reception systems as well as all current surface and control units, including delta, V-tails, canards and thrust vector control.

Downloads

csm_thumb-manual-cortex-pro_371e95e0f7
Quick Start Guide "CORTEX PRO"

+ Download DE
+ Download EN
csm_thumb-manual-cortex_81a7f358ba
Instruction manual "CORTEX"

+ Download DE
+ Download EN
csm_thumb-guide-cortex_142c6fa8c4
Quick Start Guide "CORTEX"

+ Download DE
+ Download EN

Important properties

  • Fixed-wing gyro systems "Made in Germany"
    Certified quality accredited by ISO 9001
  • Proven 3-axis stabilization technology
    Absolute precise control corrections by wind or gusts
  • Usage of high quality materials
    Silicon MEMS gyros on gold-plated circuit board
    CNC-milled aluminium housing
  • Configuration without software
    Additional tuning options via software and USB cable possible
  • Software / Firmware for free
    Future-proof due to online updates
  • Suitable for all RC pilots of any learning level
    Beginners, advanced and professional
  • Universally applicable:
    From parkflyer over 3D-acromodel up to scaler and turbine

Products

CORTEX (3-Axis fixed-wing gyro)

  • Immediately "Ready to Run", no computer necessary
  • Supports up to 5 independent channels
  • Universally for any type of fixed-wing aircrafts

CORTEX pro (3-axis fixed-wing gyro)

  • Receiver redundancy for 2 receiver
  • Up to 16 independent, stabilized channels
  • Multi protocoll input and output,
    supports all common serial receiver protocols:
    PPM sum (Jeti PPM sum pos. + Graupner SUM-O)
    Jeti EX-bus
    Futaba S.BUS1
    Graupner HOTT SUM-D (SRXL)
    Multiplex M-Link (SRXL)
    JR X.bus (Mode A + B/SRXL)
    Spektrum SRXL (for receivers using the unmodified standard SRXL!)